QUICK QUESTION
Name :
Email :
Phone Number :
Question :

Penetrometer/Sampler/Pulverizer


Trafficability Set

The HS3764 Trafficibility set is designed to meet the Army Corps of Engineers (ACOE) field bearing test for vehicles use. The set consist of a piston type sampler which obtains soil cores and determines soil density. The piston type sampler has a hollow tube with handles and plunger with a detachable sampling tube. Also included with the same diameter as the sampling tube, a base with pedestal and a drop weight tamper with foot for dropping 2 1/2 lb. weight with 18inch drop. The third part of the set consist of an ACOE type cone penetrometer similar to the HS4612. A canvas carrying case and operating instructions are also furnished with the set. Approx. shipping weight 40 lb.
...


Soil Penetrometer (C.O.E. Type)

The HS4612 cone penetrometer is used for determining the penetration resistance of soils in the field. The penetrometer is furnished with a calibrated proving ring, handle extension, two cones, and a calibration chart. This penetrometer meets U.S. Army COE specifications. The penetrometer with the 3/8inch dia. tip can measure up 750 psi. Approx. Ship Wt. 25 lb.
...


Soil Penetrometer (C.O.E. Type)- Accessories

The HS4612 cone penetrometer is used for determining the penetration resistance of soils in the field. The penetrometer is furnished with a calibrated proving ring, handle extension, two cones, and a calibration chart. This penetrometer meets U.S. Army COE specifications. The penetrometer with the 3/8inch dia. tip can measure up 750 psi. Approx. Ship Wt. 25 lb.
...


Density Tube Sample

The HS3752 thru HS3757 Corps of Engineers Density Tube Samplers are designed for determining the in-place density of cohesive soils by driving a cylinder of known volume into the soil by a dropping weight, striking-off and weighing the cylinder and core, determining moisture content and computing dry density. The Sampler has a tube holder, guide rod, handle, sliding weight and 12 tubes. Approx. Ship Wt. 20 lb.
...


Density Tube Sample- Accessories and Spare parts

Extra tube for Density Tube Sampler
...


Soil Pulverizer

The soil pulverizer is used for breaking up aggregations of air dried samples with minimal breakdown of aggregate particles and to greatly reduce the dust particles in the air when using the mortar and pestle method. The soil pulverizer is the Bureau of Public Roads type in which the aggregations are broken up by the action of loose rubber covered steel bars in rotating drums. Sample containers are 6 gallon drums approximately 11 1/4inch O.D. and 15 1/2inch long with a lid and gasket along with a quick-acting steel closure. The rotating device has a welded steel frame with rubber covered shafts and a motor drive. Samples of 15 to 30 Ib. are placed in the container with two bars, sealed with ...


Soil Penetrometer (Needle Type)

The HS3251 penetrometer is used to perform moisture- penetration tests. In the penetration test a needle of given end area is pushed into a soil sample that has been compacted in a mold. The force is then directly read off the penetrometer scale by use of an internal calibrated spring. A moisture-penetration curve can then be plotted and used to indicate moisture and density in the field. The penetrometer is furnished with seven graduated needles of different surface areas. Approx. Ship Wt. 20 lb.
...